Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Activating/deactivating
announcement of measured results
Activating/deactivating the
announcement "Take your printed
Activating/deactivating
announcement of patient
instructions (InStr)
Configuring beeps
86 •
You can set the device so that the measured results (weight, height and BMI)
are announced after every measuring operation.
(reSUL)
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "reSUL".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
If you have connected a seca wireless printer to the device, you can set the
device so that following the measurement, there is an announcement telling
you to take the printed ticket with the results.
ticket" (Print)
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "Print".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
You can set the device so that patient instructions are announced for every
measuring operation.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "InStr".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
►
Configure the beeps as described in the section entitled "Activating/
deactivating beeps (bEEP)" on page 91.
NOTE:
If voice output is in English, the unit of measurement announced will
correspond to the setting for the multifunctional display (see "Switch-
ing unit of weight (Unit)" on page 92) and to the unit of height (see
"Switching unit of height (HUnit)" on page 92).
– On
– Off
– On
– Off
NOTE:
Select a language the patient understands (see "Selecting language
(LAng)" on page 85).
– On
– Off
Werbung
