Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Handling the packing material
60 •
NOTICE!
Inconsistent measuring results
►
Before you electronically save measurement values determined us-
ing this device and use them further (e.g. in seca PC software or in
a hospital information system), make sure that the measurement
values are plausible.
►
If measurement values are transmitted to seca PC software or a
hospital information system, make sure prior to further use that the
measurement values are plausible and are assigned to the correct
patient.
NOTICE!
Malfunction caused by other ultrasonic emitters
If there are other ultrasonic emitters in the immediate vicinity of the
device - automatic door openers, for example - faulty measurements
or wireless transmission interference will occur.
►
Ensure that there are no other ultrasonic emitters in the same room
or in the immediate vicinity of the device.
WARNING!
Incorrect measurement due to reflections
If there are objects or people in the immediate vicinity of the device,
incorrect measurements will result.
►
Ensure that there are no objects or people within 0.5 meter of the
front or side of the scale during the measuring process.
►
Ensure that the device is at least 0.2 meter away from the wall.
►
Ensure that the patient is not wearing any kind of hair accessory on
top of the head.
WARNING!
Risk of suffocation
Packaging material made of plastic foil (bags) is a choking hazard.
►
Keep packaging material out of reach of children.
►
In the event that the original packing material may not be available
anymore, only use plastic bags with security holes in order to reduce
the risk of suffocation. Use recyclable materials if possible.
NOTE
Keep the original packing material for future use (e.g. returning for
maintenance service).
Werbung
