Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ecodesign Information
Network Port: Single WiFi network port, activated by default.
Model No.:
RF Frequency Range:
Maximum Transmit Power:
Communications Protocol: IEEE802.11 b, g, n
The KCL95 has a single WiFi network port and is intended for use as remotely operated, network equipment.
The Network Port can be deactivated in the WiFi settings menu and selecting "Off".
The Network Port can be re-activated in the WiFi settings menu and selecting "On".
Reactivation: The appliance can be reactivated from standby mode by;
From networked standby: Touch the display screen, rotate the control dial or remotely via the App.
From non-networked standby: Touch the display screen, rotate the control dial.
The bowl and lid should always be kept fitted to the main unit so that it can be operated remotely.
Factory Reset - Important
When disposing of the appliance, it is important to factory reset it to protect your personal data. Selecting this option will erase all
WiFi data stored on the appliance and restore it to factory settings. To factory reset your appliance, select Settings> Factory Reset.
WEBSITE
Modes
Non-Networked Standby - After 20 mins of inactivity display screen turns off. WiFi
network port de-activated.
Networked Standby - After 20 mins of inactivity display screen turns off and all WiFi
network ports remain activated.
Off -Activated by switch on rear of unit.
18
TYPE: KCL95
2412 - 2472 MHz
< 20 dBm
Power consumption
0.2 W
0.7 W
0.0 W
Werbung
