CGS XT-T1 Betriebsanleitung Seite 99

Symbol
Timer
Manual mode
Button functions
Button or button
combination (permanent)
Up
Down
Back short (< 2 s)
Back long (> 2 s)
Menu/OK short (< 2 s)
Up + Down long (> 2 s)
+
Down + Menu/OK
very long (> 5 s)
+
Product:
Temperature controller XT-T1
Off
Timer is not active and
also not configured
Manual mode is not active
(= automatic mode)
in basic satus
Increase setpoint value
In manual mode: Increase
output level (or open actua-
tor in the case of the three-
step controller)
Decrease setpoint value
In manual mode: Decrease
output level (or close actua-
tor in the case of the three-
step controller)
Function configurable
(default setting: without
function)
Function configurable
(default setting: switch
to manual mode / end
manual mode)
Call up main menu
Start/stop autotuning
Call up menu for level
inhibit
Revision 2.0 – Issue September 2018
Lights up
Timer is configured but
not active
Manual mode is active
The outputs can be
manually controlled using
the „Up" and „Down"
buttons: Increase/decrease
output level or
three-step controller:
Open/close actuator).
Function
when navigating
Select previous menu
item or parameter
Select next menu item
or parameter
Move to menu level
above
---
Call up sub-menu or
switch to editing mode
---
---
Flashes
Timer is active (running)
---
when editing
Increase value or go up
in picklist
Decrease value or go
down in picklist
Leave editing mode
without changes
---
Leave editing mode with
changes
---
---
99/166
E