Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Parameter
Data format
E
Min. response time
(setup only)
NOTE!
The RS485 interface cannot be operated at the same time as the setup interface (USB).
NOTE!
There is a separate interface description available with further information. Amongst other things, this includes the
Modbus addresses of all device data, process value, and configuration parameters avail able via Modbus.
Behaviour after power on
The inputs are set to 0 (binary) or „NOINPUT" (analog) during the device's initialization phase. Once the initialization is
complete, the values transferred via Modbus are applied.
Selection/text/value
8-1 no parity
8-1 odd parity
8-1 even parity
8-2 no parity
0 to 500 (40)
Product:
Temperature controller XT-T1
Description
8 data bits, 1 stop bit, no parity
8 data bits, 1 stop bit, odd parity
8 data bits, 1 stop bit, even parity
8 data bits, 2 stop bits, no parity
The minimum response time (in milliseconds) is adhered
to by the device (Modbus slave) before a response is sent
following a data request.
Revision 2.0 – Issue September 2018
140/166
Werbung
