CGS XT-T1 Betriebsanleitung Seite 103

Inhibited levels
Configuration
Configuration and parameterization
Configuration, paratereization and programm editor
Complete (configuration, parameterization, program editor, and user level)
7.7 User level
The user level is only available on the device. Four setpoint values can be set here. The output level and
the analog input's measured value are also displayed here (default setting).
The input limits of the setpoint values are dependent on the configuration of the respective setpoint value
(Configuration > Controller > Setpoint values). The input range of -1999 to 9999 shown in the following
table represents the maximum possible limits.
No. Parameter
1 Setpoint value 1
2 Setpoint value 2
3 Setpoint value 3
4 Setpoint value 4
5 Output level display
6 Measured value
The selection of the maximum 16 parameters that appear in the user level can be changed or supplemented
using the setup program (Setup only > User level).
The setpoint values can also be entered in the setup program in the scope of the controller configuration.
7.8 Device information
The device name, various version designations, and counter readings are displayed in this menu. It also
includes a function for resetting the device to the default settings.
7.8.1 Versionen
Device name
The device name can be changed using the setup program (Configuration level > System data; default setting: Name).
Software version
Device software version (e.g. 3830102)
The software version number is composed of the basic version (383), the device version (in the example:
01), and the current version (in the example: 02).
VDN Version
Version of a special device version
ST code version
Version of the „ST code" extra code
Hardware version
Device hardware version
Product:
Temperature controller XT-T1
Selection/text/value
-1999 bis 9999 (0)
-1999 bis 9999 (0)
-1999 bis 9999 (0)
-1999 bis 9999 (0)
(Display only)
(Display only)
Revision 2.0 – Issue September 2018
Description
Setpoint value 1
Setpoint value 2
Setpoint value 3
Setpoint value 4
Current controller output level
Current measured value of analog input
E
103/166