Herunterladen Diese Seite drucken

CGS XT-T1 Betriebsanleitung Seite 143

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Parameter
Switch-on time
Break time
Pulse time
Behaviour after power on
The control signals are not active during the device's initialization phase (depending on the configura tion).
10.3 User level
The individually configurable user level can include up to 16 parameters (process values or configuration parameters).
Select the corresponding line and click „Edit" in order to edit a parameter (or double-click the correspond ing line).
Parameter
Parameter
Parameter description in
national language 1
to
Parameter description in
national language 4
10.4 Flags
Flags are variables that are available in the device as intermediate storage. They can be edited on the device in the user
level or described and read by a Modbus master via the RS485 interface. The values are not saved on the device (data
loss in the event of power failure).
Analog flag
The following configuration parameters are available for both of the two analog flags.
Parameter
Analog flag
Temperature
Product:
Temperature controller XT-T1
Selection/text/value
0 to 9999
0 to 9999
0 to 9999
Selection/text/value
Selector
<Enter text>
Selection/text/value
-1999 to 9999 (0)
None
Relative
Absolute
Revision 2.0 – Issue September 2018
Description
Pulses: Switch-on time (high status; in seconds)
Delay: Delay time (in seconds) for the transition from low
to high status
Pulses: Switch-off time (low status; in seconds)
Delay: Delay time (in seconds) for the transition from high
to low status
Time (in seconds) for pulse function
Description
Select the process value or configuration parame ter from
the selector
The selected parameter is available in the user lev el.
Default settings:
4.7 „User level", page 34
Enter individual text or use default text
The text is used in the user lever to name the pa rameter
in the respective national language of the device texts.
Description
Flag value
This selection is important for the automatic con version in
case of a change in temperature unit (°C/°F) (see system
data).
The value is not a temperature.
The value is a temperature difference.
The value is a temperature value.
E
143/166

Werbung

loading

Verwandte Produkte für CGS XT-T1