CGS XT-T1 Betriebsanleitung Seite 104

7.8.2 Service
The counters are configured using the setup program (Setup only > Service):
E
Service counter
Zählerstand des Servicezählers
Operating time
Operating hours counter reading
Default setting
The device can be reset to the default settings in this menu item. To do so, press the „Menu/OK" button
for at least 5 seconds.
The device is automatically restarted once the default settings are applied.
Product:
Temperature controller XT-T1 Revision 2.0 – Issue September 2018
104/166