Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
1.5 Intended use
The intended use for the purposes of this manual means that this product must only be used for the
applications described in the catalogue and in the technical description and only in conjunction with
external devices and components approved or recommended by CGS.
The product described in this manual has been developed, manufactured, tested and documented in
compliance with the applicable safety standards. No danger to personal health or property damage
therefore normally ensues from compliance with the handling guidelines and safety instructions
described for its project planning, assembly, intended use and maintenance.
This device has been designed to ensure safe separation between the primary and secondary circuits.
Low voltages that are connected must therefore also be generated using safe isolation.
1.6 Qualified personnel
Only those persons who are familiar with the installation, assembly, implementation and operation of
the product are qualified.
These persons have the following qualifications:
•
They are authorised, trained or instructed to operate and maintain equipment and systems in accordance
with established safety procedures for electrical circuits, high pressures and aggressive and hazardous media.
•
For devices with explosion protection: They are authorised, trained or instructed in carrying out work on
electrical circuits for hazardous systems.
•
They are trained or instructed in the maintenance and use of protective equipment in accordance with
established safety procedures.
1.7 Warranty information
The contents of this manual is neither part of any previous or existing agreement, commitment or a
previous or existing legal relationship, nor should anyone modify these. All obligations by CGS arise from
the respective sales contract, which also contains the complete and solely applicable warranty terms and
conditions.
These contractual warranty regulations are neither extended nor limited by the contents of the manual.
The manufacturer accepts no liability for damage or malfunctions resulting from failure to observe the
operating instructions.
Apart from the operating instructions and regulations regarding accident prevention applicable in the
country and place of use, you must also observe the recognised technical regulations for safe and proper
work.
The warranty claim expires if the device is not installed, implemented, operated and maintained in
accordance with regulations.
Product:
Temperature controller XT-T1
Revision 2.0 – Issue September 2018
88/166
Werbung
