CGS XT-T1 Betriebsanleitung Seite 114

Parameter
Message text 2
E
Top text display
Bottom text display
9.5 Analog input
The device has a universal analog input for connecting various measuring probes (sensors).
Parameter
Signal type
Selection/text/value
<Enter text>
Message text 1
Digital selector
No selection
Digital selector
No selection
Selection/text/value
No sensor
2L RTD temperature probe
3L RTD temperature probe RTD temperature probe in three-wire circuit
2L resistance/potenti ometer Resistance/potentiometer in two-wire circuit
3L resistance/potenti ometer Resistance/potentiometer in three-wire circuit
Resistance transmitter
Thermocouple
0...10 V
2...10 V
0...20 mA
4...20 mA
Product:
Temperature controller XT-T1
Description
Formats 108H, 108Q, and 104:
The text is displayed in line 4.
Formats 132 and 116:
The text is displayed in line 2.
Digital signal (high active) for activating the text display
in the top line (line 3)
Digital signal (high active) for activating the text display
in the bottom line (line 4 or line 2)
Description
No sensor selected
RTD temperature probe in two-wire circuit
Resistance transmitter
Thermocouple
Voltage signal
Voltage signal
Current signal
Current signal
Revision 2.0 – Issue September 2018
114/166