Changing The Tank Water; Switching Off The Warewasher - Miele PTD 701 Betriebsanleitung

| |
English 6 Operation
6.4

Changing the tank water

Change the tank water if it is very dirty and if the end wash result worsens.
Note: It takes a few minutes until the warewasher is ready for operation again, as the tank is first emptied and then refilled and
reheated.
6.5

Switching off the warewasher

We recommend switching off the warewasher at the end of the working day with the self-cleaning programme (} page 69) so that it is
cleaned and emptied each day.
Pressing the On/Off button switches the warewasher off. The tank stays filled but will no longer be kept at temperature. If the tank tem-
perature has dropped too much before the machine is switched on again, the machine will be emptied and refilled automatically.
66
| |
11208020/04; 2023-07 Operating instructions