|
|
English
8
Cleaning and maintenance
Cleaning the outside of the warewasher
Ø
Do not spray the warewasher and the surrounding area (panels, floor) with a steam jet or high-pressure cleaner.
Ensure when cleaning the floor that the plinth of the warewasher is not flooded, to prevent an uncontrolled inflow of water.
Ø
Clean the display with a damp cloth.
Ø
Clean the external surfaces using a stainless steel cleaner and stainless steel polish.
Cleaning the upper and lower wash field
After cleaning
8.2
Topping up the regeneration salt
Note
Damage to the water softener
Chemicals such as detergent or rinse aid and other salts such as table salt or thawing salt will inevitably damage the
water softener.
Ø
Fill only with regeneration salt or a pure evaporated salt with a maximum grain size of 1-4 mm.
Ø
Only fill with water when commissioning the water softener for the first time.
Ø
Top up the regeneration salt.
Ø
Note: Danger of rust formation in the filling area as a result of salt residues! After filling the regeneration salt, start a washing
programme or the self-cleaning programme in order to wash away any salt residues that may be present. We recommend starting
the self-cleaning programme, as salt residues can have a negative impact on the wash result.
70
~ 1,5 kg
|
|
11208020/04; 2023-07
~ 1,5 l
Operating instructions