Changing The Tank Water; Switch Off The Warewasher - Miele PTD 901 Originalbetriebsanleitung

| |
English 6 Operation
6.6

Changing the tank water

Change the tank water if it is very dirty and if the end wash result worsens.
Note: It takes a few minutes until the warewasher is ready for operation again, as the tank is first emptied and then refilled and reheated.
6.7

Switch off the warewasher

We recommend switching off the warewasher at the end of the day using the self-cleaning programme, so that it is cleaned and emp-
tied daily.
Pressing the On/Off button turns the warewasher off. The tank will remain filled but will not be kept at temperature. If the tank temperat-
ure drops too much by the time it is switched on again, the machine is automatically emptied and refilled.
88
| |
12020302; 2021-09 Operating instructions PTD 901