Before Working With The Warewasher For The First Time; Putting A Preserved Warewasher Back Into Service - Miele PTD 701 Betriebsanleitung

5.6

Before working with the warewasher for the first time

Ø
Arrange for the warewasher to be set up by an authorised service technician or by your dealer.
Ø
Arrange for the warewasher to be connected by authorised technicians according to the locally applicable standards and regula-
tions (water, waste water, electrical system).
Ø
After connecting the water and the power properly, contact the relevant Miele dealership or your dealer to arrange initial commis-
sioning of the warewasher. Arrange for the operator and operating personnel to be trained in operating the warewasher.
5.7

Putting a preserved warewasher back into service

Note: Only for AE RO warewashers with integrated reverse osmosis module.
For warewashers with preserved membranes in the reverse osmosis module, the preserving agent must be rinsed off during recommis-
sioning.
Item Description
1 Cancel the programme
Ø
Set the date and time (} page 53).
Ø
Check whether it is necessary to replace the activated carbon filter (see date entry on the activated carbon filter). The maximum
service life is 1 year.
Operating instructions
1
1
| |
11208020/04; 2023-07
| |
Commissioning 5 English
2 s
63