Chemicals; Suction Tube With Level Control; Technical Data - Miele PTD 701 Betriebsanleitung

3.7

Chemicals

Operate the warewasher with chemicals from Miele. If other chemicals are used, contact Miele or an authorised customer service con-
tact beforehand. Only use products that are suitable for commercial warewashers.
Rinse aid
Rinse aid is required in order to ensure that water on the wash items runs off as a thin film after washing. This ensures that the wash
items dry quickly.
Rinse aid is automatically dispensed using an integrated dosing device.
Detergent
A detergent is required to dissolve food residues and dirt on the wash items. Detergent is automatically dispensed using an integrated
or external dosing device.
To avoid damaging the warewasher and to achieve a good wash result:
– Do not use acidic detergents.
– Do not use foaming products (e.g. manual washing-up liquid) for pre-treating the wash items.
3.8

Suction tube with level control

Note: Only for machine with external canisters.
The float switch (1) can detect a defect in the chemicals and indicates this on the display (} page 67).
3.9

Technical data

Description
Rack dimensions
Tank capacity
Noise emission
IP protection class
Min. water flow pressure
Max. inlet pressure
(back pressure)
Flow rate
Inlet water temperature
Exhaust air
Observe local guidelines, e.g. DIN EN 16282 / VDI guideline 2052 when constructing the ventilation system.
Operating conditions
Name
Temperature at the installation site
Relative air humidity at the installation site
Storage temperature
Max. height of the installation location above sea level
Test marks and symbols
CE 2006/42/EC Machine Directive
UKCA The Supply of Machinery (Safety) Regulations 2008
Operating instructions
Note
Standard dB(A)
PTD AE RO
Plastic rear cover
Stainless steel rear
panel
Standard kPa (bar)
PTD AE RO
kPa (bar)
l/min
Standard
PTD AE RO
Colour
(cover cap)
Blue
Grey
1
Unit
PTD 701
mm 400 x400
l 9,5
°C
Unit
°C
%
°C
m
|
11208020/04; 2023-07
Machine description
Canister
Rinse aid (optional)
Detergent (optional)
Value
PTD 702 PTD 703
500 x 500 500 x 500
15,3
55
62,5
IPX3
IPX5
100 (1,0)
140 (1,4)
1000 (10,0)
min. 4
max. 60
max. 35
Value
0 - 40
< 95
> -25
2000
|
| |
3 English
PTD 704
500 x 500
500 x 540
-
47