Installing The Warewasher In A Counter - Miele PTD 701 Anschlussplan

Installing the warewasher in a counter

To avoid damage to furniture caused by steam in the vicinity of the warewasher, we recommend using furniture suitable for commercial
use. It is not necessary to secure the warewasher inside the counter.
When installing in a counter, the niche dimensions must be observed.
Standard
We recommend assembly on 3 adjustable feet so that the installed warewasher can be easily adjusted in terms of the height.
2
PTD 701 AE RO, PTD 702 AE RO
The warewasher can also be installed without legs. However, it can then no longer be adjusted.
Height of the warewasher without legs: 810-815 mm
Niche dimensions
Standard
Dimensions in mm
The warewasher can be raised up to 35 mm using the adjustable feet.
PTD 701
PTD 702
PTD 703
PTD 704
PTD 701 AE RO
PTD 702 AE RO
Subject to technical alterations
3
A B
725 460
725 600
820 600
820 600
820 460
820 600
Ø
Remove adjustable foot (1) and (2).
1
Ø
Install adjustable foot (3) with the shorter thread. (Adjustable
foot (3) is included with the warewasher).
Ø
Push the warewasher into the niche and align it horizontally.
PTD 701 AE RO
PTD 702 AE RO
C D
603 730 - 750
603 730 - 750
603 825 - 845
637 825 - 845
603 825 - 855
603 825 - 855
| |
11208062/01; 2023-03
E F
470 - 480 605
610 - 620 605
610 - 620 605
610 - 620 640
470 - 480 605
610 - 620 605
14