5.8
Before working with the warewasher for the first time
Ø
Have the warewasher set up by an authorised service technician or your dealer.
Ø
Have the warewasher connected according to the locally applicable standards and the regulations by authorised mechanics (water,
waste water, electrical system).
Ø
After connecting the water and the power properly, contact the relevant Miele Factory Representative or your dealer to organise the
commissioning of the warewasher. Make sure that you and your operating personnel take that opportunity to be trained in using the
warewasher.
5.9
Check for completeness
Note: Ensure that there is always enough detergent and rinse aid available to achieve an optimum wash result.
Operating instructions PTD 901
|
|
12020302; 2021-09
|
|
Commissioning
5
English
81