Configuring The Transfer Strip; Before Working With The Warewasher For The First Time - Miele PTD 901 Betriebsanleitung

| |
English 5 Commissioning
5.7

Configuring the transfer strip

A service technician configures the transfer strip in the Dosing menu, specifying the type of dosing device.
Detergent dosing device
1
Item Description
1 Reset to default setting
2 For dosing devices not from Miele:
– While the machine is filling
– Parallel to the solenoid valve
– Peristaltic pump
For Miele dosing devices:
– Fluidos
– MPI/PPX
3 Save settings
Rinse aid dosing device
1
Item Description
1 Reset to default setting
2 For dosing devices not from Miele:
– Parallel to the rinse pump
– Parallel to the solenoid valve
– Peristaltic pump
For Miele dosing devices:
– Fluidos
– MPI/PPX
3 Save settings
5.8

Before working with the warewasher for the first time

Ø
Arrange for the warewasher to be set up by an authorised service technician or by your dealer.
Ø
Arrange for the warewasher to be connected by authorised technicians according to the locally applicable standards and regula-
tions (water, waste water, electrical system).
Ø
After connecting the water and the power properly, contact the relevant Miele dealership or your dealer to arrange initial commis-
sioning of the warewasher. Arrange for the operator and operating personnel to be trained in operating the warewasher.
68
2 3
2 3
|
12020321/01; 2023-07
Note
With the "peristaltic pump" setting, also set the output in ml/min.
Set the dosing amount in the dosing menu.
Note
With the "peristaltic pump" setting, also set the output in ml/min.
Set the dosing amount in the dosing menu.
|
Operating instructions