en - Before using for the first time
Basic settings
Switching on the dishwasher
Open the door.
Switch the dishwasher on using the
sensor control.
The welcome screen will appear when
the dishwasher is switched on and the
welcome melody will sound.
For further information about the dis-
play functionality, see the "Display
functions" section in the "Guide to the
appliance" chapter.
Setting the language
The display will then change automatic-
ally to the screen for setting the lan-
guage.
Select the language you want as well
as the country, if appropriate, using
the sensor controls and confirm
with OK.
For further information on setting the
language, see the "Settings" chapter
under the "Language" section.
A tick will appear next to the lan-
guage that has been set.
Setting up Miele@home
The message
Miele@home
on the display.
To set up Miele@home now, confirm
by touching OK.
Tip: To postpone setup until later, select
the option
and confirm by touching
Skip
OK.
44
will appear
There are two ways of connecting your
dishwasher to your WiFi network:
Select the connection method you
want and confirm your choice with
OK.
1.
Connect using App
2.
Connect using WPS
(WPS = WiFi Protected Setup)
You will then be guided by the display
and the relevant Miele networking solu-
tion.
For further information on
Miele@home, see the "Miele@home"
section in the "Settings" chapter.
Setting the time of day
The time of day is set automatically if
a connection is established with the
WiFi network.
The display will then change to the
screen for setting the time of day.
The current time of day must be set be-
fore you can use the timer option.
Use the sensor controls to enter
the hour and confirm your entry by
touching OK.
Then set the minutes and confirm
with OK.
Holding down the relevant or
sensor control will increase or de-
crease the time automatically.