Setting Parameters For Individual Fittings; Parameter Setting Via The Device List - schell 00 500 00 99 Anleitung Zur Inbetriebnahme

Configuring the Water Management Server

Setting parameters for individual fittings

2.7 Setting parameters for individual fittings
The settings that can be configured in the parameter settings are essentially
the same as those which can be programmed manually on the fitting.
For some fittings, however, several advanced functions can only be set in the
SWS software (for details, please consult the installation instructions for the
fitting in question).
Use the "Manual Programming (On/Off)" parameter to activate or deactivate
manual programming directly on the fitting itself.
The SWS application offers two ways of setting parameters for individual fit-
tings.

1. Parameter setting via the device list

2. Setting via the room layout
2.7.1 Parameter setting via the device list
Path: Devices — All Devices — Faucet X — Configuration
The devices/fittings in the Water Management System are shown in the "All
Devices" submenu.
» Click an entry in the list to access the following information and setting
options for the corresponding fitting:
– Information
– Modules
– Configuration
– Diagnostics
» Use the "Configuration" menu item to set parameters on the fitting.
The following input fields are available at the end of the parameter list for
describing the fitting and for information about installation:
– Description, assigned name
– Installation, date
Fig. 32: Parameter setting via the device list
EN
187