Changing/Creating A New Thermal Disinfection - schell 00 500 00 99 Anleitung Zur Inbetriebnahme

Configuring the Water Management Server
Configuring hygiene functions

2.5.3 Changing/creating a new thermal disinfection

Path: Hygiene — Thermal Disinfection — Create New
» As a first step, select the subscribers (individual fittings or a group) for the
relevant thermal disinfection and apply the selection.
The subscribers are thermally disinfected one after the other.
If you want to thermally disinfect several fittings at the same time, these need
to be placed into a group. Remember this during group management (see
"2.4 Grouping fittings" on page 171).
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
» Give the thermal disinfection a name and apply the selection with the "Ap-
ply" button.
» Configure the automation according to the specifications of your drinking
water installation. In doing so, observe the following information about
configuration parameters.
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
Fig. 22: Thermal disinfection configuration, example: Setting flush start
Fig. 21: Selecting subscribers
Please note
If available, always
select
leak protec-
tion fittings as sub-
scribers .
Scroll 
Selection
Apply
175
EN