Commissioning
Checking/making general server settings
1.7.4
System configuration – error output
Path: Facility Information — Server — Server, Configuration — System-Errors
System error configuration allows you to define the use and behaviour of the
error output and the acknowledgement input.
Configuration of error output
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
»
If required, activate the output signal for outputting system errors.
»
Select the required output under "Signal" and save your configuration.
Inversion of the error output signal
Use the "Inversion" menu item to configure the output signal as follows:
On -> Low level = error message
Off -> High level = error message
Fig. 3: Activating/deactivating error output
EN
155