Summary Of The Most Important Configuration Parameters - schell 00 500 00 99 Anleitung Zur Inbetriebnahme

Configuring the Water Management Server

Summary of the most important configuration parameters

2.2 Summary of the most important configuration parameters
Device Information/Modules/Configuration/Diagnosis
Information about the connected devices can be queried and parameters set
under "All Devices". This menu item can be used to detect fittings and give
them meaningful names.
Path: Devices — All Devices — Faucet X
If necessary, the fittings can be assigned to groups (group management).
Path: Devices — New Group, Create
Hygiene
» Create stagnation flushes for the available fittings/groups with the required
configuration (mode, flow time, etc.).
Path: Hygiene — Stagnation Flush — Create New
» Set up thermal disinfections for the available fittings/groups with the facili-
ty-specific parameters (mode, flow time, etc.).
Path: Hygiene — Thermal Disinfection — Create New
Cleaning stop
» Configure a cleaning stop for fittings/groups, if required.
Path: Cleaning Stop — Create New
Leak protection
» If one or more SWS leak protection fittings are installed in your system,
you can configure corresponding opening times and other parameters to
protect against water damage.
Path: Leak Protection – Create New
Collective configuration
You can use a collective configuration to configure multiple fittings of the
same type in a single step.
168