Commissioning
Commissioning the SWS network
1.14.4 Adding an SWS BE-F/BE-F Flow wireless bus extender
If you want to add another SWS BE-F/BE-F Flow wireless bus extender to an
existing SWS network, proceed as follows:
»
Restart the commissioning.
»
Select the new SWS BE-F/BE-F Flow wireless bus extender that is to be
added to the network.
Please note
>
Battery-operated SWS BE-F/BE-F Flow wireless bus extenders
that are already integrated into the network are not shown.
»
Save the new selection.
1.14.5 Removing all SWS BE-F/BE-F Flow wireless bus extenders
from a Water Management Server
If you want to cancel the assignment of all SWS BE-F/BE-F Flow wireless bus
extenders to the current Water Management Server – which removes the en-
tire SWS network – proceed as follows:
»
Restart the commissioning.
The current network assignment is shown in the commissioning network de-
vice list.
»
Deselect all SWS BE-F/BE-F Flow wireless bus extenders in the list (click to
remove the tick mark).
»
Save the reduced selection.
The SWS BE-F/BE-F Flow wireless bus extenders are now no longer assigned
to the Water Management Server and are now again visible to other servers.
EN
165