Commissioning
Commissioning the SWS network
»
Confirm the warning notice with "OK".
The server now scans the network for available SWS bus extenders. These are
the SWS BE-K/BE-K Flow wired bus extenders connected via a cable and the
SWS BE-F/BE-F Flow wireless bus extenders that are not assigned to any other
Water Management Server.
After a successful network scan, the detected devices are shown in the com-
missioning submenu.
The SWS BE-K/BE-K Flow wired bus extenders are already given a grey tick,
since they are assigned to the Water Management Server via the cable.
»
From the list of SWS BE-F/BE-F Flow wireless bus extenders, click to select
those that are to be assigned to the Water Management Server. The selec-
tion is marked with a red tick.
162
LOGOUT
System Setup
eSchell Navigation
Facility Information
>
Available Devices
(0)
Devices
>
Hygiene
>
Cleaning Stop
>
Manual Operation
>
Protocols
>
Visualization
>
User-/Profile-Management
>
System Setup
>
User Manuals
>
© Copyright 2017 SCHELL GmbH & Co. KG
Fig. 10: Starting commissioning
Fig. 11: Commissioning network is created