schell 00 500 00 99 Anleitung Zur Inbetriebnahme Seite 174

Configuring the Water Management Server
Configuring hygiene functions
Configuring output signals
Overview of configurable parameters:
Output signal
Signal
Signal type
Please note:
An output signal can be used to indicate the execution of a configured auto-
mation by an external signal (such as a warning horn or light).
This output signal can also be used as a means of controlling other systems
(ventilation, window opening, etc.).
Please note that both the signal output and the corresponding signal type
must be configured.
Configuring termination signals
Overview of configurable parameters:
Termination signal Off/On
Signal
Please note:
Execution of the respective automation can be cancelled using an external
termination signal.
Saving the automation
Please note
»
After configuration
-> save your automa-
Once the configuration of a stagnation flush has been completed and saved,
tion!
this automation is automatically activated and carried out.
Save
Execution can be deactivated by using the following menu item:
Path: Hygiene — Stagnation Flush — Stagnation Flush XY — Automation, En-
Multiple stagnation flushes can be active at the same time. Make sure that the
various stagnation flushes configured do not access the same fittings.
174
Configurable selection
Off/On
Output 1 to 4
Warning horn
Warning light
Heating contact
FM/PLC
Configurable selection
Input 1 to 4
Save the automation by clicking the "Save" button.
able/Disable
Factory setting
Off
–
Warning horn
Factory setting
Off
–