Configuring the Water Management Server
Configuring hygiene functions
2.5.4 Changing/creating a new cleaning stop
The fittings in a sanitary facility can be taken out of operation for cleaning pur-
poses. To do this, a switch is connected to the Water Management Server, and
the cleaning stop is configured appropriately. If cleaning personnel operate
the relevant switch, showers can also be cleaned without a risk of accidental
triggering.
Path: Cleaning Stop — Create New
»
As a first step, select the subscribers (individual fittings or groups) for the
respective cleaning stop and apply the selection.
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
»
Give the cleaning stop a name and apply the selection with the "Apply"
button.
»
Configure the automation according to your requirements. In doing so,
observe the following information about configuration parameters.
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
Fig. 24: Cleaning stop configuration, example: Setting flow time
Fig. 23: Selecting subscribers
Scroll
Selection
Apply
179
EN