Establishing Connectivity Via A Fixed Network - schell 00 500 00 99 Anleitung Zur Inbetriebnahme

Commissioning
Setting up a connection to the Water Management Server
The Water Management Server hosts its own Wi-Fi network.
Please note
»
»
The login credentials for the Wi-Fi network and the IP address can be found
on the back of the Water Management Server.
1.5.2
There are two options for connecting the computer to the Water Manage-
ment Server over a fixed network:
1. Via a local area network (LAN)
2. Direct cable connection between the computer and Water Management
If the LAN connection will be set up using an existing company network, ask
the network administrator for the required settings.
In the second case, use a network cable to connect the computer and the
Water Management Server together.
With an up-to-date computer and standard network settings, network setup
Please note
and connection to the Water Management Server should be automatic.
If a permanent IP ad-
dress is set on the
If the connection cannot be established, check to see whether your computer
computer, a direct
(for connecting to the Water Management Server over the LAN) is set up to
LAN connection is
obtain an IP address automatically.
not possible.
152
Connect your computer or mobile device to this network.
Enter the IP address (e.g. 192.168.1.1) into the address bar on your web
browser and press ENTER to confirm.

Establishing connectivity via a fixed network

Server (IP address: 192.168.18.1)