Configuring Hygiene Functions; Advice On Configuring Hygiene Functions; Changing/Creating A New Stagnation Flush - schell 00 500 00 99 Anleitung Zur Inbetriebnahme

Configuring the Water Management Server

Configuring hygiene functions

2.5 Configuring hygiene functions
2.5.1
Always follow generally recognised codes of practice when using and pro-
gramming the Water Management System.
The hygiene functions are configured using the "Hygiene" menu item.
Appropriate parameters must be chosen to match the stagnation flushes and
thermal disinfections to the respective drinking water installation.
The procedure for setting both functions is similar and involves three steps:
1. Selecting subscribers (fittings/groups)
2. Configuring hygiene functions
3. Saving hygiene functions
The configured stagnation flushes are carried out automatically. Thermal disin-
fections and cleaning stops are triggered from the "Manual Operation" menu
item or via the programmed input.

2.5.2 Changing/creating a new stagnation flush

Path: Hygiene — Stagnation Flush — Create New
Please note
»
If available, always
select
leak protec-
tion fittings as sub-
scribers .
»
172

Advice on configuring hygiene functions

Important information when using leak protection fittings
When configuring your hygiene flushes, always ensure that the correspond-
ing leak protection fittings are selected as subscribers. If a leak protection
fitting is available, this will be preselected by the system.
As a first step, select the subscribers (individual fittings or a group) for the
relevant stagnation flush and apply this selection.
Schell Web-App
https://sws.schell.eu/schell/assets/schell-embedded-ui/01.14B10/app.html
© Copyright 2021 SCHELL GmbH & Co. KG
Give the stagnation flush a name and apply the selection with the "Apply"
button.
Fig. 19: Selecting subscribers