Inhaltsverzeichnis
Werbung
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
GENERAL SAFETY RULES
FOR POWER TOOLS
WARNING: When using electric tools the following basic
safety precautions should always be followed to reduce the
risk of tire, electric shock and personal injury.
Piease read all these instructions before attempting to
operate this product.
• KEEP GUARDS IN PLACE, and in working order.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting
wenches are removed from tool before tuming it on.
• KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
• DON'T USE IN DANGEROUS ENVIRONMENT. Do not
use power tools in damp or wet location, or expose
them to rain. Do not operate them in an area with flam-
mable liquids or gases. Keep work area well lighted.
• KEEP CHILDREN AWAY. All visitors should be kept at
a safe distance from work area.
• MAKE WORKSHOP CHILD PROOF. Lock access of your
workshop. When not in use, tools should be stored in a
dry locked up place, out of reach of children.
• DON'T FORCE TOOL. It will do the job better and safer
at the rate for which it was designed.
• USE RIGHT TOOL. Don't force tool or attachment to
do a job for which it was not designed.
• USE PROPER EXTENSION CORD. Make sure your ex-
tension cord is in good condition. When using an ex-
tension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersize cord
will cause a drop in line voltage resulting in loss of
power and overtleating. When tool is used outdoors,
use on I y extension cords intended for outdoor use
and so marked.
• WEAR PROPER APPAREL. Do not wear loose clothing,
gloves, neckties, rings, bracelet, or others jewellery
which may get caught in moving parts. Nonslip foot-
wear is recommended. Wear protective hair covering
to contain long hair. Roll long sleeves above elbows.
• ALWAYS USE SAFETY GOGGLES. Everyday glasses on
I y have impact resistant lenses, they are NOT safety
glasses. Also use face or dust mask if cutting opera-
tion is dust y.
• SECURE WORK. Use clamps or a vice to hold work
when practical. It is safer than using your hand and it
frees both hands to operate tool.
• DON'T OVERREACH. Keep proper footing and balance
at all times.
• MAINTAIN TOOL WITH CARE. Keep tool sharp and
clean for best and safest performance. Follow instruc-
tiorls for lubrication and changing accessories.
• 5. DISCONNECT TOOLS before servicing; when chang-
ing accessories, such as blades, bits, cutters and the
like.
• USE RECOMMENDED ACCESSORIES. Consult the
owner's manual for recommended accessories. The
use of improper accessories may cause risk of injury
9
Werbung
Inhaltsverzeichnis
