Removing / Fixing The Teleskopic Runners - KKT KOLBE EB8017ED Benutzerhandbuch

Cleaning and maintenance
Removing the teleskopic runners
For left-hand disassembly (right-hand side mirror-inverted):
• Lift up the front end of the telescopic runner firmly so
that the front clamp is released. (Fig. 1).
• Pull the whole telescopic runner slightly forward and
remove it sideways. (Fig. 2)
1
A
2
3
C
B
D
1
2
Fixing the teleskopic runners
For left-hand mounting (right-hand side mirror-inverted):
• Place the telescopic rail points marked A and B hori-
zontally on the underside of the rail. (Fig. 1).
• Rotate the telescopic runners 90 degrees anti-clockwi-
se (clockwise for right side). (Fig. 2).
• Slide the telescopic runner backwards so that it is
clamped to the lower rail element at the rear (C) and to
the upper rail element at the front (D). (Fig. 3).
63