Removing The Oven Door; Removing The Telescopic Runners - KKT KOLBE EB8010ED Benutzerhandbuch

Care and cleaning

Removing the oven door

• Open the door to the maximum angle and pull the lock
back at the hinge of the door (1.1).
• Close the oven door at about 15 degree, then lift the door
and slowly pull out from the oven (1.2).
• To reinstall after cleaning, follow the steps above in reverse
order.
2.1
A
2.3
B
42
2. 2
2. 4
C
1.1

Removing the telescopic runners

For disassembly on the left side
(right side mirror-inverted):
• Press on the hooks of the telescopic slide at the points
marked A until they are released from the slide-in grid and
then turn the telescopic slide slightly counterclockwise.
(2.1)
• Lift the telescopic slide slightly so that you can remove it
from the grid without the hooks getting caught.
• Now you can remove the telescopic slide from the oven.
(2.2)
Fixing the telescopic runners
For mounting on the left side
(right side mirror-inverted):
• Place the rail hooks at the points marked B on the upper
guide rail of the desired insertion level in the insertion grid
and then turn the telescopic rail clockwise. (2.3)
• Press the rail hooks at the points marked C on the lower
guide rail until they „snap in". (2.4)
• Before closing the appliance door, make sure that all tele-
scopic runners are fully inserted.
1.2