Dimensions And Installation; Dimension Sketch; Installation Notes - KKT KOLBE EB8017ED Benutzerhandbuch

Dimensions and installation

Dimensions and installation

Dimension sketch

Specifications in mm
560
5 5 9 6
5 5 9 9 5 5

Installation notes

Warning!
This appliance may only be installed, earthed and
commissioned by a certified electrician
in accordance with the applicable regulations
and standards to avoid risks of electric shock
and injury.
Damages occur because of incorrect installation
are not within the warranty.
• Check the appliance if there is any damage before
installation and do not connect the appliance if there is.
• While doing the installation, wear protective gloves
to prevent yourself from getting cut by sharp edges.
• Prepare the installation opening for installing
the oven according to the dimensions shown in the
illustration above.
• Have the oven connected to the mains by a certified
electrician.
It is necessary to have the plug accessible or to install
a switch in the fixed wiring, in order to disconnect
the appliance from the supply after installation when
necessary.
• Push the oven completely into the installation opening,
taking care not to bend, squeeze or twist the cable.
44
min. min.
550 550
min. min.
600 600
105
560 560 +
5 5 7 6
566
min. 585
4 4 6 6 0 0
max. 595
min.35
500
8 8
Warnung!
The appliance must not be installed behind a
decorative door in order to avoid overheating.
• Open the appliance door and fix the oven to the built-in
furniture by screwing the screws supplied into the
mounting holes on the left and right of the frame of the
cooking chamber.
• Note:
To avoid damage, screw in the screws
by hand and do not overtighten them.
• Clean up all the packaging materials and adhesive film
from the appliance, before turning on the appliance.
500
min. min.
550 550
590
105
500
+8 8
560
560
min.35
min.35
4 4 6 6 0 0
min.35