Technical Details; Energy Efficiency - KKT KOLBE EB8017ED Benutzerhandbuch

Technical details

Technical details
Model name
Supplier's name
Energy efficiency index (EEI)
Energy efficiency class
Energy consumption per cycle in convection mode
Energy consumption per cycle in conventional mode
Number of cavities
Volume of cavity
Heat source
Power
Voltage
Cable length
Appliance dimensions (W×D×H)
Weight
Energy efficiency according to EN 60350-1
Please note the following information:
• The measurement is carried out in the "ECO" mode to
determine the data regarding the forced air mode and
the label-class.
• The measurement is carried out in the "Top & Bottom
Heat" mode to determine the data regarding the con-
ventional mode.
• During the measurement only the necessary accessory
is in the cavity.All other parts have to be removed.
• The oven is installed as described in the installation
guide and placed in the middle of the cabinet.
Note on the EC Declaration of Conformity
Product Description:
EB8017ED
Built-in electric oven
Manufacturer:
KKT KOLBE Küchentechnik
GmbH & Co. KG
Ohmstraße 17
D-96175 Pettstadt
www.kolbe.de
info@kolbe.de
66
EB8017ED
KKT KOLBE
81.9
A+
0.69 kWh / cycle
1.06 kWh / cycle
1
72 l
Electricity
2900 W
220-240 V
1.0 m
59.5 × 56.6 × 59.6 cm
35.5 kg
• It is necessary for the measurement to close the door
like in the household, even when the cable disturbs the
sealing function of the gasket during the measurement.
To make sure, that there are no negative effects on the
energy data due to the disturbed sealing, it is necessary
to close the door carefully during the measurement.
It is may be required to use a tool to guaranty the
sealing of the gasket like in the household, where no
cable disturbs the sealing function.
• The determination of the cavity volume carried out for
the usage "Defrost". To ensure an efficient use of the
oven, all accessories including side-racks are removed.
For the product described in this manual, the correspon-
ding EC Declaration of Conformity is available.
Some of the relevant documents can be viewed
and downloaded from our website on the relevant
product page.
You are welcome to obtain the complete documents
on written request via the adjacent contact address.
Jan Kolbe
Head of Product Management