Removing The Door Cover; Rails - KKT KOLBE EB8017ED Benutzerhandbuch

Cleaning and maintenance

Removing the door cover

The plastic inlay in the door cover may become discolo-
red. To carry out thorough cleaning, you can remove the
cover.
Remove the appliance door like instructed above.
• Press the right and left sides of the cover and remove
it.
• After removing the door cover, the remaining parts of
the appliance door can be easily removed so that you
can continue cleaning. When cleaning of the appliance
door is complete, replace the cover and press it down
until you hear it click into place.
• Fit the appliance door and close it.
2
1
3
Caution!
While the appliance door is well installed, the
door cover can also be taken off, by this time.
• Removing the door cover means to set the
inner glass of the appliance door free, the
glass can be easily moved and cause damage
or injury.
• As removing the door cover and inner glass
means to reduce the overall weight of the
appliance door.
The hinges can be moved more easily when
closing the door and you may be trapped. Keep
your hands away from the hinges.
Because of the 2 points above, we strongly recommend
you not to remove the door cover unless the appliance
door removed. Damage caused by incorrect operation is
not covered under warranty.

Rails

For thorough cleaning of the rails and the cavity, you can
remove the side racks as shown in the fiugure on the left.
In this way your appliance will retain its appearance and
remain fully functional for a long time.
To replace the side racks, proceed in reverse order.
61