Troubleshooting; Possible Cause - Cramer 82ZT107 Bedienungsanleitung

EN
9

TROUBLESHOOTING

PROBLEM
Vehicle won't
move.
Sudden break-
down during driv-
ing
The blade does
not operate after
pulling the PTO
switch.
The blade stops
when mowing
grass.

POSSIBLE CAUSE

The battery compartment is not inser-
ted into the battery pack or not Cram-
er designated battery pack.
Battery pack is not charged.
Steering control levers are in parking
brake position.
No one is sitting on the seat or
the operator presence switch is not
closed.
The left and right park switches are
not in the initial position when the
power is on.
The battery compartment is in dor-
mant state.
Battery is not charged.
Rough and bumpy roads, resulting
in disconnection of the operator pres-
ence switch.
Left/Right accelerator is failure.
Drive controller failed.
The battery compartment is not inser-
ted in the battery pack specified by
Cramer.
The battery power is lower than 5%.
The operator presence switch is not
closed.
The blade switch (PTO) is not in the
initial position before power on.
Blade motor blocking or other func-
tional protection.
Drive controller is malfunctioning.
Blade controller is malfunctioning.
Blade motor overload.
English
SOLUTION
To ensure the normal operation of the vehicle, at least
1 piece of Cramer designated battery pack products
should be placed in the battery compartment.
Check the battery pack power.
Ensure that the left and right control levers are not in
parking brake position.
Make sure the driver is sitting on the seat.
Put the steering control levers in the parking brake posi-
tion and restart the machine, if it still cannot be started,
please contact the relevant Cramer after-sales person-
nel.
Turn the key switch to OFF gear and wait for more than
5 seconds before restarting the machine.
To ensure the normal operation of the whole vehicle, it is
necessary to place at least 1 piece of Cramer designated
battery pack products in the battery compartment and
ensure that the battery pack has power.
Put the steering control levers in the parking brake posi-
tion and restart the machine.
Contact Cramer after-sales service staff..
Contact Cramer after-sales service staff..
To ensure the normal operation of the whole vehicle, it is
necessary to place at least 1 piece of Cramer designated
battery pack products in the battery compartment and
ensure that the battery pack has power.
Check the battery pack power, if the battery power is low,
charge the battery.
Ensure the driver is sitting on the seat.
Press the PTO and pull it up again.
Check that there are no weeds and other foreign objects
at the connection between the blade and the motor to
ensure smooth blade rotation. It is recommended to pull
up the deck and start the blade before adjusting the deck
to required gear.
Check the error code apperaring on the display.
Check the error code apperaring on the display.
Clean the inside of the deck, make sure there is no
abnormal blade rotation, press the PTO, restart the ma-
chine and reduce the blade load, either by raising the
height of the cutting table or reducing the driving speed.
26