Display Structure; Explanation Of Standard Symbols; Symbols In Graphics/Instructions - Wilo Stratos GIGA Einbau- Und Betriebsanleitung

11.2

Display structure

11.3

Explanation of standard symbols

11.4

Symbols in graphics/instructions

11.4.1 Menu elements
12.3
4.1.0.0
Installation and operating instructions • Wilo-Stratos GIGA, Wilo-Stratos GIGA B • Ed.01/2023-05
4
5
4
2
Fig. 36: Display structure
1 Menu number
3 Value display
5 Units display
NOTICE
The display can be rotated by 180°. To change it, see menu number
<5.7.1.0>.
The standard symbols are shown on the status display at the positions shown above:
Symbol Description
Constant speed con-
trol
Constant
Δp-c control
PID-Control
Input In2 (external
2
setpoint) activated
Access disable
BMS (Building Man-
agement System) is
active
DP/MP operating
mode:
Parallel operation
Table 19: Standard symbols of status display
In the "Operating instructions" chapter, graphics are used to illustrate the operating
concept and setting instructions.
The following symbols are used to simplify the display of menu elements or actions:
• Menu status page: standard view on the display.
• "One level down": A menu element with subordinate menu levels which you can switch
to (e.g. <4.1.0.0> to <4.1.1.0>).
1
1 0 0 0
2 0 0
max
R P M
min
2 Standard symbols
4 Symbol display
Symbol
min
max
en
4
0
2
3
Description
Min operation
Max. operation
Pump is running
Pump stopped
Pump running in
emergency opera-
tion
(icon flashes)
Pump stopped in
emergency opera-
tion
(icon flashes)
DP/MP operating
mode:
Main/reserve
129