8
Operation
8.1
Controls
Operating button
Fig. 30: Operating button
DIP switch
ON
1 2
Fig. 31: DIP switch
8.2
Display structure
Installation and operating instructions Wilo-CronoLine-IL-E, CronoTwin-DL-E, CronoBloc-BL-E
The electronics module is operated using the following operating
elements:
The operating button (Fig. 30) can be turned to select menu elements
and used to change values. Pressing the operating button activates a
selected menu element and confirms values.
The DIP switches (Fig. 9, Item 6/Fig. 31) are located under the housing
cover.
• Switch 1 is for switching between the standard and service mode.
For additional information, see chapter 8.6.6 "Activating/deactivating
service mode" on page 97.
• Switch 2 allows activations or deactivation of the access disable feature.
For additional information, see chapter 8.6.7 "Activating/deactivating
access disable" on page 97.
Information appears on the display as shown in the sample illustration
below:
1
4
2
5
max
min
4
2
Fig. 32: Display structure
Ite
Description
m
1
Menu number
2
Value display
3
Units display
Table 6: Display structure
NOTICE:
The display can be rotated by 180°. To change, see menu
number <5.7.1.0 >.
1 0 0 0
0
0
R P M
Ite
Description
m
4
Standard symbols
5
Symbol display
English
4
0
2
3
91