Menu Elements Reference - Wilo Stratos GIGA Einbau- Und Betriebsanleitung

11.6.7 Activating/deactivating access
disable
11.6.8 Termination
11.7

Menu elements reference

Installation and operating instructions • Wilo-Stratos GIGA, Wilo-Stratos GIGA B • Ed.01/2023-05
ON
• To deactivate, return the switch to its starting position.
1
In order to prevent inadmissible changes to the pump settings, all functions can be dis-
abled.
When access is disabled, this is shown on the status page by the default "access dis-
able" symbol.
To activate or deactivate:
ON
• Set DIP switch 2 to the "ON" position.
2
Menu <7.0.0.0> is displayed.
• Turn the operating button to activate or deactivate the disable function.
• To confirm the change, press the operating button.
Current status of disable function:
• Disable active
No changes can be made to setpoints or settings. Read-only access to all menu ele-
ments is maintained.
• Disable inactive: the elements of the basic menu can be edited (menu elements
<1.0.0.0>, <2.0.0.0> and <3.0.0.0>).
NOTICE
To edit the sub-elements of menu <5.0.0.0>, service mode must also be
activated.
ON
• Reset DIP switch 2 to the "OFF" position.
2
The display returns to the status page.
NOTICE
Errors can be acknowledged after a waiting period despite the "access
disable" being active.
In order to establish a clear communication connection between two electronic modules,
both line ends must be terminated.
The electronic modules are factory set for twin-head pump communication and the ter-
mination is permanently enabled. No further settings are required.
This section gives an overview of all items on all menu levels. The menu number and item
type are marked separately, the function of each item is explained. If applicable, there is in-
formation about the setting options of the individual elements.
NOTICE
Some items are hidden under certain conditions. They are therefore
skipped when navigating the menu.
Example: If the external setpoint adjustment in menu <5.4.1.0> is set to
"OFF", menu number <5.4.2.0> is hidden. Menu number <5.4.2.0> is only
visible if the external setpoint adjustment in menu <5.4.1.0> is set to
"ON".
en
135