Sleep Button - Argo MONOSPLIT R32 WIFI Bedienungs- Und Wartungsanleitung

N.B.:

may not be available. When the air conditioner receives this signal, the fan will start operating in
.
automatic mode

SLEEP button

By pressing this button you can select Sleep 1
- SLEEP 1 works in cooling and dehumidification mode: after one hour of unit operation, the temperature will
increase by 1°C, after 2 hours it will increase by 2°C; in heating mode, after one hour of unit operation, the
temperature will decrease by 1°C and after two hours will decrease by 2°C.
- SLEEP 2 the air conditioning operates on the basis of pre-set temperature curves.
In cooling mode:
1. When the initial temperature is set to 16°C-23°C, after activating the Sleep function, the temperature will
increase by 1°C every hour, after three hours the temperature will stabilize, after 7 hours the temperature will
decrease by 1°C and the unit will start working constantly.
2. When the initial temperature is set to 24°C-27°C, after activating the Sleep function, the temperature will
increase by 1°C every hour, after two hours the temperature will stabilize, after 7 hours the temperature will
decrease by 1°C and the unit will start working constantly.
In heating mode:
1. When the initial temperature is set to 17°C-20°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after one hour the temperature will decrease and the unit will maintain this constant
temperature.
2. When the initial temperature is set to 21°C-27°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after two hours the temperature will decrease and the unit will maintain this
constant temperature.
3. When the initial temperature is set to 28°C-30°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after three hours the temperature will decrease and the unit will maintain this
constant temperature.
- SLEEP 3: it is possible to customize the sleep curve: in this mode, keep the "TURBO" key pressed for a long
time to access the setting of the CUSTOM SLEEP function.
1. The remote control timer display shows "1 hr" and the set temperature indication "88" displays the
corresponding temperature of the last set sleep curve and flashes (the first data item is linked to the initial values
of the curve set in factory).
2. Press "▲" and "▼" to adjust the corresponding temperature. After adjustment, press the "TURBO" key to
confirm.
3. At this point, the time of the timer on the remote control increases automatically in steps of 1 (ie "2 hr" or "3
hr" ... or "8 hr"). The set temperature indication "88" displays the corresponding temperature of the last set
sleep curve and flashes.
4. Repeat steps (2) and (3) until the temperature setting is complete for 8 hours; at this point the sleep curve is
set correctly. When this operation is completed, the remote control resumes displaying the time of the initial
timer and the temperature displayed is the one initially set.
I FEEL function
Press this button to start the I FEEL function. The
select this function, the remote control will send the detected ambient temperature to the indoor unit, which will
, Sleep 2 , Sleep 3
icon will appear on the remote control display. When you
74
and cancel the Sleep function.