Outdoor Unit Installation - Argo MONOSPLIT R32 WIFI Bedienungs- Und Wartungsanleitung

N.B.:
• Avoid bending the drain pipe too much in order to prevent clogging.

Outdoor unit installation

Step one: secure the outdoor unit support
1. Choose a location for the unit according to the structure of the house.
2. Use expansion screws to secure the outdoor unit support in the chosen position.
N.B.:
• Take the appropriate safety measures when
installing the outdoor unit.
• Make sure that the bracket can support at least
four times the weight of the unit.
• The outdoor unit must be connected at least
3 cm above the ground in order to install the drain
joint.
• Units with a cooling capacity of 2300 W
5000 W require 6 expansion screws; units with a
cooling capacity of 6000 W – 8000 W require 8
expansion screws; units with a cooling capacity of
10000 W – 16000 W require 10 expansion
screws.
–
108