Maintenance Plan - HERON 8896431 Bersetzung Der Ursprünglichen Bedienungsanleitung

formance of the generator. Table 5 provides the plan of
tasks that must be performed in regular intervals by the
operator themselves and that may only be performed
by an authorised service centre for the HERON® brand.
 To exercise a claim to warranty repairs, it is neces-
sary to present/provide documentation of proof
of purchase and performed servicing inspections
- tasks. These records are entered into the second
part of the user's manual designated as "Warranty
and service". Not presenting/providing servicing
records will be deemed to constitute neglected
maintenance, which will result in loss of guarantee
according to the warranty conditions.

MAINTENANCE PLAN

Always perform in the
here specified operating hour intervals
Maintenance task
Motor oil
Check condition
Air filter
Spark plug
Valve movement
Visual inspection
Fuel line
and replacement
Fuel tank
strainer
Fuel tank
Fuel filter
(fig. 2, position 1)
Oil filter
(Fig.4, position 6)
Combustion chamber
Fuel valve Purging (fig. 19)
Inspection/mainte-
Electrical part
EN
Before
every use
Check oil level
X
Replacement
X
(2)
Cleaning
Inspection,
adjustment
Replacement
Inspection-
adjustment
X
(5)
of tightness
Inspection
if necessary
Cleaning
Cleaning
Replacement
Replacement
Cleaning
nance
In the event of a malfunction on the generator and the
submission of a claim to free warranty repairs, the failure
to adhere to these service tasks represents grounds for
rejection of the warranty on the basis of neglect of mainte-
nance and non-adherence to the user's manual.
 To extend the lifetime of the generator, we recommend
that a complete inspection is performed after 1200 hours
of operation, including repairs, covering the following tasks:
y the same tasks according to the maintenance plan after every
200 hours and the following tasks that may only be perfor-
med by an authorised service centre for the Heron® brand:
y inspection of the crankshaft, piston rod and piston
y inspection of collector rings, carbon brushes of the alter-
nator or shaft bearings
•
ATTENTION
y Not adhering to the servicing tasks in the main-
tenance intervals provided in table 5 may lead to
a malfunction or damage of the generator, which is
not covered by the free warranty repair.
After first Every
5 hours of 50 oper.
operation hours
X
(1)
X
(2)
Every 2 calendar years (replacement as necessary) X
After every 500 operating hours X
After every 500 operating hours X
After every 500 operating hours X
Every 12 months from purchase X
Every 100 Every 300
oper. hours oper. hours
X
X
X
X
(3)
(3)
(3)
X
X
(3)
(3)
X
(4)
Table 5
124