Maintenance Plan - HERON 8896230 Bersetzung Der Ursprünglichen Bedienungsanleitung

MAINTENANCE PLAN

Always perform in the
here specified operating hour intervals
Maintenance task
Check condition
Motor oil
Check condition
Air filter
Inspection, ad-
Spark plug
Inspection- ad-
Valve movement
Visual inspection of
Fuel line
Inspection and
replacement if ne-
Fuel tank
strainer
Fuel tank
Carburettor -
setting
tank
Carburettor
Combustion cham-
ber
Fuel valve
Inspection/mainte-
Electrical part
•
ATTENTION:
y Tasks marked with the X
formed only by an authorised service centre for
the HERON® brand and tasks marked with X
by a qualified inspection technician specialising
in electrical devices, see below. Other tasks may
be performed by the user themselves.
•
NOTES
1
(X ) Perform the first oil change after the first 5 hours of
operation because there may be fine metal dust from
the engine's bores present in the oil, which may cause
the oil sensor to short-circuit.
2
(X ) An inspection of the air filter must be performed
each time before the generator is put into opera-
tion, since a clogged air filter prevents the supply
of combustion air into the engine, which leads to
its clogging, etc. Clean the filter every 50 hours of
operation according to the described procedure,
EN
Before
every use
X
Replacement
X
(2)
Cleaning
justment
Replacement
justment
X
(5)
tightness
cessary
Cleaning
Cleaning
Draining via
setting tank
screw
Cleaning
Cleaning
Cleaning
nance
(3)
symbol must be per-
(4)
•
ATTENTION
y Not adhering to the servicing tasks in the main-
tenance intervals provided in table 4 may lead to
a malfunction or damage of the generator, which is
not covered by the free warranty repair.
After first Every
5 hours of 50 oper.
operation hours
X
(1)
X
(2)
Every 2 calendar years (replacement as necessary) X
After every 500 operating hours X
After every 500 operating hours X
After every 500 operating hours X
Every 12 months from purchase X
when used in a dusty environment clean the filter
every 10 hours or more frequently depending on
the dustiness of the environment. In the event of
heavy soiling or wear and tear/damage, replace
it with a new original part from the manufacturer
(the air filter for the given generator model can
be ordered under the number listed in table 1).
3
(X ) These maintenance points may only be performed
by a service centre authorized for the HERON® brand.
The performance of the tasks by a different service
centre or by the user themselves will be assessed as
unauthorised tampering with the product, the result
of which is the voiding of the warranty (see Warranty
conditions).
•
4 ATTENTION
(X )
According to current regulations in force for the
inspection of electrical equipment, the inspection
and checks of all types of generators may only be
performed by an inspection technician qualified for
Every 100 Every 300
oper. hours oper. hours
X
X
X
X
(3)
(3)
(3)
X
X
(3)
(3)
X
(3)
(4)
Table 4
112