Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance Plan - HERON 8896430 Bedienungsanleitung

Stromerzeuger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 78
vals by the operator themselves and that may only
be performed by an authorised service centre for the
HERON® brand.
            To exercise a claim to warranty repairs, it is neces-
sary to present/provide documentation of proof
of purchase and performed servicing inspections
- tasks. These records are entered into the second
part of the user's manual designated as "Warranty
and service". Not presenting/providing servicing
records will be deemed to constitute neglected
maintenance, which will result in loss of guarantee
according to the warranty conditions.
In the event of a malfunction on the generator and the
submission of a claim to free warranty repairs, the failure

MAINTENANCE PLAN

Always perform in the here
specified operating hour intervals
Maintenance task
Motor oil
Check condition
Air filter
Spark plug
Valve movement
Visual inspection
Fuel line
and replacement
Fuel tank
strainer
Fuel tank
Fuel filter
(fig. 14, position 1)
Oil filter
(fig. 14, position 5)
Combustion cham-
ber
Fuel valve
Inspection/mainte-
Electrical part
EN
Before
every use
Check oil level
X
Replacement
X
(2)
Cleaning
Inspection,
adjustment
Replacement
 
Inspection-
adjustment
X
(5)
of tightness
Inspection
if necessary
Cleaning
Cleaning
Replacement
Replacement
Cleaning
Purging
nance
to adhere to these service tasks represents grounds for
rejection of the warranty on the basis of neglect of mainte-
nance and non-adherence to the user's manual.
            To extend the lifetime of the generator, we recom-
mend that a complete inspection is performed after
1200 hours of operation, including repairs, covering
the following tasks:
y the same tasks according to the maintenance plan after
every 200 hours and the following tasks that may only
be performed by an authorised service centre for the
Heron® brand:
y inspection of the crankshaft, piston rod and piston
y inspection of collector rings, carbon brushes of the alter-
nator or shaft bearings
ATTENTION
y Not adhering to the servicing tasks in the main-
tenance intervals provided in table 4 may lead to
a malfunction or damage of the generator, which is
not covered by the free warranty repair.
After first
Every
5 hours of
50 oper.
operation
hours
X
(1)
X
(2)
 
 
Every 2 calendar years (replacement as necessary) X 
After every 500 operating hours X 
After every 500 operating hours X 
After every 500 operating hours X 
Every 12 months from purchase X 
Every
Every
100 oper.
300 oper.
hours
hours
X
X
 
X
 
X
(3)
 
(3)
(3)
X
X
(3)
(3)
X
(4)
Table 5
118

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis