General Safety Instructions; Safety Information - Checchi & Magli AL Bedienungs- Und Wartungsanleitung

General safety instructions

Failure to comply with some simple safety and pru-
dence rules is the cause of most accidents and inju-
ries at work.
In most cases, accidents can be avoided by foresee-
ing the possible causes and consequently acting with
the necessary care and caution.
Exercising caution and care is the best way of avoid-
ing accidents.
Read this manual carefully before proceeding with
any operations concerning use, maintenance or oth-
er work on the work vehicle.
Safety instructions for handling and transportation
Perform lifting and handling manoeuvres as in-
structed in the plates on the work vehicle and in the
user manual supplied by the manufacturer.
Loading, unloading, handling and lifting operations
must be carried out by qualified and authorised per-
sonnel that has received specific training.
Safety instructions for use and operation
To reduce risks of accidents as much as possible, the
tractor must be driven by a trained operators who is
able to coordinate the work of all the other staff in-
volved in the work.
The machine must only be put to the uses specified
by the manufacturer; misuse may cause safety and
health risks and could result in damage of a financial
nature.
Before using the work vehicle check that the guards
are all fitted correctly.
Before hitching the work vehicle up to the tractor,
make sure the tractor is in good condition.
English language

SAFETY INFORMATION

Heed and comply with the symbols on the work vehi-
cle, especially those concerning safety.
When the machine is in use, the operator and the
people directly involved in the operations must wear
accident prevention equipment; for this purpose
contact the safety manager.
Never leave the driver's seat when the tractor engine
is running.
Before transporting, make sure the work vehicle and
its components are anchored to the means of trans-
port, to prevent uncontrolled movements.
Check that the work vehicle complies with the maxi-
mum clearance limits; where necessary, provide the
signs required by applicable law.
Check that the work vehicle coupling to the tractor at
the third point of the hitch is securely locked so that
it cannot work loose.
When driving on the roads, the driver must comply
with the highway code, ensuring the tractor is road-
worthy and the relative signs to signal jutting objects
are affixed.
Do not carry people on the work vehicle when mov-
ing from one area to another or on the roads.
Never leave the driver's seat when the tractor engine
is running.
Before leaving the tractor, lower the work vehicle
to the ground, stop the engine, engage the parking
brake, and remove the ignition key from the control
panel and store in a safe place.
11
3
Use and maintenance