Commands For Summing Function - HBM WE2108 Serie Referenzhandbuch

Scale electronic unit (NSW)
11.2
(add measured value)
add the current display value (gross or net) to the total sum memory
If a "?" is returned, this may be caused by the following reasons:
•
•
This command initiates an adding action. The text "AddEd" appears in the display for 1 sec-
ond. The rules for execution are the same as when addition is initiated manually by the
"print" key. As the interface ist set to PC−coupling mode, printing is not possible at the same
time.
(clear sum + number)
Deletion of sum and summand counter
(summing functions)
a) enable summing function
WE2108

Commands for summing function

ADD
Command:
Parameter:
Password protection: no
Parameter backup:
Answer:
Query:
The counting scale (type = 0) is enabled, but the display is still in weighing mode
summing function is disabled ( activate by SUM0,1; or menu)
CSN
Command:
Parameter:
Password protection: no
Parameter backup:
Query:
SUM
Command:
Parameter:
Range:
Factory setting:
Password protection: no
Parameter backup:
Query:
ADD;
−−
automatic (new sum value)
"0" if adding allowed
"?" adding not possible
not intended;
CSN;
−−
automatic (memory cleared)
not intended;
SUM 0,x;
1
0 = disabled,
0
automatic
SUM?0;
1 = enabled
125
HBM