Addressing A Unit With Unknown Address - HBM WE2108 Serie Referenzhandbuch

Scale electronic unit (NSW)
8.2.3
If only one unit is connected to the PC (or only one unit is switched on), a new address (here:
31) can be set without knowledge of the old address. This process is suitable for resetting a
WE2108 with unknown address.
For this purpose enter the command string
In the case of success the following answer appears:
Prerequisite:
•
•
WE2108

Addressing a unit with unknown address

S98;
ADR31;
S31;
0CRLF
The interface configurations of PC and WE2108 must agree. If this is also unknown, the
above stated command string must be output with each setting (baud / parity) until a cor-
rect answer appears.
The WE2108 can generally be addressed only by PC if the parameter F_Ser is set to 2 in
the ioSEt menu (condition on delivery).
113
HBM