Ec Declaration Of Conformity - Optimum Optidrill DX 13V Betriebsanleitung

EC - Declaration of Conformity
in accordance with the Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer/
distributor:
hereby declares that the following product
Product designation:
Type designation:
Manual bench drilling machine with control board for speed control, for private persons as well as for work-
shops and industrial plants, which meets all the relevant provisions of the above mentioned Directive 2006/
42/EC as well as the other directives applied (below) including their amendments in force at the time of
declaration.
The following other EU Directives have been applied:
EMC Directive 2014/30/EC ; Restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment 2015/863/EU
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 12717: 2001 - Machine tools - Safety - Drilling machines
EN 60204-1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1837:1999+A1:2009 - Safety of machinery - Integral lighting of machines
EN 13849-1:2015 - Safety of machinery - Safety related parts of controls - Part 1: General design principles
EN 13849-2:2012 - Safety of machinery - Safety related parts of controls - Part 2: Validation
EN ISO 12100:2013 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN 50370-2 - Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2:
Immunity
EN 55011:2016 + A1:2017 - Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement - class B
EN 61000-6-3:-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emis-
sions (equipment input current <= 16 A per phase)
EN 61000-6-3:-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated
current <= 16 A per phase and not subject to conditional connection
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer (CEO, General Manager)
Hallstadt, 2020-11-09
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Bench drilling machine
DX13V | DX15V
Dr.-Robert-Pfleger-Str. 26, D - 96103 Hallstadt, Germany