Safety; Rating Plate - Optimum OPTIdrill B 50GSM Betriebsanleitung

1

Safety

Glossary of symbols
 gives further advice

calls on you to act
enumerations

This part of the operating instructions
explains the meaning and use of the warning notices included in these operating instruc-

tions,
defines the intended use of the geared drill,

points out the dangers that might arise for you or others if these instructions are not

observed,
informs you about how to avoid dangers.

In addition to these operation instructions, please observe
the applicable laws and regulations,

the legal regulations for accident prevention,

the prohibition, warning and mandatory signs as well as the warning labels on the geared

drill.
Always keep this documentation close to the geared drill.
If you would like to order another operating manual for your machine, please indicate the serial
number of your machine. The serial number is printed on the type plate.
1.1

Rating plate

INFORMATION
If you are unable to solve a problem using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt
Email: info@optimum-maschinen.de
Safety
Version 1.1.4 - 2021-01-04 Translation of original instruction
B50 GSM EN
61