Mounting The Wire Spool - Abicor Binzel ABIBUG 300 Originalbetriebsanleitung

6 Commissioning

6.7 Mounting the wire spool

EN - 26
Rotate the device to work position.
1
This illustration is an example only and serves to
clarify the location/position of the device.
The actual illustration will vary according to the
assembly/disassembly step.
Switch on the device at the On/Off switch.
2
The LED illuminates.
Pull the lever and open the wire spool cover.
3
Press the bayonet lock button and rotate it
4
to the left.
Turn the locking hook so that it points upward.
5
Remove the wire coil mandrel.
6
Insert the wire spool so that the wire can be
7
unrolled counter clockwise.
ABIBUG 300